VDM® ALLOY 825 sheet 2.4858 coldrolled

Número de artículo: 40169434_2000_1995

Detalles del producto

VDM Categoría: VDM® Alloy 825
Nickel Nickel-Alloy: 2.4858
Thickness: 2 mm
Anchura: 2.000 mm
Longitud: 1.995 mm

Información adicional

SHEET VDM® ALLOY 825 (NICROFER 4221) MATERIAL NO. 2.4858 / UNS N08825 VDTÜV WB 432/1:2017-04-19 DIN 17744 09/2002 DIN 17750 09/2002 ASTM B424-11 (REAPPROVED 2016) ASME BPVC.II.B-2019 SB-424 BS 3072:1989 NACE MR0103/ISO 17945:2015 NACE MR0175/ISO 15156-3:2015 COLD ROLLED, SOFT ANNEALED, DESCALED INSPECTION CERTIFICATE 3.1 ACC. TO DIN EN 10204/01.2005

VDM® Alloy 825

VDM® Alloy 825 is a titanium-stabilized fully austenitic nickel-iron-chromium alloy with additions of copper and molybdenum. It is used in the oil and gas industry and in a wide variety of chemical processes.

  • High resistance to chloride-induced stress corrosion
  • Good resistance to chloride-induced pitting and crevice corrosion
  • Good resistance to oxidizing and non-oxidizing hot acids
  • Good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 °C (1.020 °F)
  • Approval for pressure vessels with wall temperatures up to 450 °C (842 °F) acc. to VdTÜV and 538 °C (1,000 °F) for Section VIII Division 1 vessels acc. to ASME.

Certifications and approvals

VdTÜV 432
ASTM B 424
NACE MR 0103
NACE MR 0175


Peso y precio

Peso por unidad:
aprox. 68,00 kg
1 Pieza(s) contiene 68 kg
¿Le gustaría ver precios y condiciones?
Inscribirse ahora.